Sterndrive Engineering — Performance, Value & a Warranty all in one!
Results 1 to 4 of 4

Thread: Water hose on Alpha 1

  1. #1
    Join Date
    Jun 2009
    Posts
    1

    Default Water hose on Alpha 1

    Is it possible to replace the water hose without removing the outdrive and the bellows? I had read where the 3/4" hose needed to be 13 inches, so I shortened it and now it has come off. Sooo - now I need a new hose and need to replace.

  2. #2
    Join Date
    Sep 2006
    Posts
    551

    Default

    You need to remove the u-joint bellows so you can access the top fitting where the hose is connected.

    Tech Support

  3. #3

    Default water hose length

    If hose isn't supposed to be 13" what is the required length?

  4. #4
    Join Date
    Oct 2007
    Posts
    14

    Default

    Quote Originally Posted by jerry@shotgunscores.us View Post
    If hose isn't supposed to be 13" what is the required length?
    According to a website that sells Mercruiser molded hoses the size is : 3/4 " X 13 7/8 "

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

115 S. Forest Lakes Blvd.
Oldsmar, FL 34677

tel: 813.925.7127
fax: 813.925.7064


Sterndrive Engineering, Inc. (SEI) manufactures a stern drive designed to replace Mercury Marine's MerCruiserŽ Alpha OneŽ, R, MR, Gen II and Bravo OneŽ stern drives. MerCruiserŽ Alpha One, R, MR, Gen II and Bravo OneŽ are trademarks of the Brunswick Corporation. SEI has no affiliation with the Brunswick Corporation. Consequently, any warranties governing products and or sold by Brunswick Corporation will not apply to products manufactured and or sold by SEI, or to products damaged due to the operation of an SEI product.