View Full Version : New lower unit installed, 1 problem.
KineticMedia
07-25-2004, 07:06 PM
I had the lower unit installed last weekend and he said the lower unit pressure test failed. There seems to be gear lube leaking somewhere.
I can see gear lube come out of the drain hole.
What are the possible causes of gear lube getting back into the boat?
KineticMedia
Technical Support
07-26-2004, 10:11 AM
One possibility is that the quad ring that goes inbetween the upper and lower is not seated properly.
What drainhole is the oil coming out of?
If you want you can give me a call at 727-461-0811 and ask for Tech.
Thanks,
Tech Support
KineticMedia
07-26-2004, 12:14 PM
It is coming out of the bildge drain.
I am going to check to night how fast it is leaking.
KineticMedia
Technical Support
07-26-2004, 01:40 PM
It would also be a good idea to check the oil level in the sterndrive. With the drive trimmed doen, pull the plug out of the side of the upper housing and see if the oil is full. It should be just to the bottom of the threads.
Then put the upper plug back in, and remove the bottom plug and see if there is water in the oil.
Tech
KineticMedia
07-26-2004, 09:47 PM
OK I did some more research tonight. I drained the gear lube and it looks a bit lighter green than it did originally. I have read that if its milk white it is bad, but what if it just got a bit lighter? Is that normal?
I opened up the engine compartment and there was a puddle of gear lube underneath my engine.
KineticMedia
Technical Support
07-26-2004, 10:04 PM
Give me a call tomorrow and we'll figure it out.
Thanks,
Tech Support
727-461-0811
vBulletin® v3.6.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.